Recommended settings for Verbatim media: - MKM-001-00 discs (rated at 2.4X) - Burn at 2.4X. MKM-003-00 discs (rated at 8X) - Burn at 2.4X, or at 4X with OPC turned on in ImgBurn (Tools - Settings. - Write (tab) - Place check mark next to 'Perform OPC Before Write'). My personal recommended settings for Verbatim MKM-003-00 discs (based on Lightning UK's settings): - Fire up EEPROM Utility, make sure you select the correct burner if you own more than one, then click on the Options tab. Clear the OPC history and power cycle the drive (just reboot your PC) if you've used other settings previously that haven't worked for you, then enable the following options: - Smart Burn Hyper Tuning Do NOT enable Over Speed Writing or Online Hyper Tuning. That only needs to be done once, then you can burn MKM-003-00 discs at 4X with OPC off and you should find that the results are excellent. These settings may also improve burn quality with other media so experiment with them and see how it goes.

• Burning Xbox 360 Games Without Modding

A question I get a lot about Xbox 360 flashes is 'How do I burn games'? Well, in this guide I will be showing you all the materials required. I'm having some problems getting my XGD3-games to work on my xbox 360. When I insert a XGD3-game (I'm always using my Activate.iso first) my screen turns grey/black for 2-3 seconds before it returns to the normal dashboard.

Ricordati che il decoder scrive un piccolo file di configurazione sull'hd/pen drive quindi non sbagliare a cancellarlo.! Aggiornamento software united dvbt 9082. Puoi anche provare a collegarlo al decoder solo dopo che hai acceso quest'ultimo in modo da forzare il riconoscimento dell hd. X Vegax ciao, l'errore che ti da l'ho avuto anche io: il mio hd esterno quando non funziona rimane in stand-by ed occorre premere sul pulsante di accensione per attivare il collegamento.

Burning XGD2 and XGD3 games WITHOUT Burner Max (NOT RECOMMENDED FOR XGD3 TITLES). XGD2 - If you have done everything I've mentioned above, insert your blank disc, double-click the.dvd file which will launch ImgBurn, then press the burn button. Wait for the disc to burn and verify (verification is optional, but it's a good idea to do it). XGD3 - If you have done everything I've mentioned above, insert your blank disc, double-click the.dvd file which will launch ImgBurn, then press the burn button. As XGD3 ISOs are too large to fit on a dual-layer disc, an extra window will open. Choose the option to 'Write to end of disc (Truncate)' and hit OK. Wait for the disc to burn and verify.

You will need to use these free programs: And you will need this pay program (relatively cheap, at least in terms of how much money you will save!). Passwprd to the files? No this is not warez #$%@ tards lolololol this is pirate bill little guy. And hey there is a way without flashing your drive i just anit found it yet but i will. And if you dont except the update when your playing the game you wont get banned so just dont play the game online or go and RENT the game first then update it with that copy then take it back to the store and play your burned copy and voila.

Once the test is complete, you'll see a couple of graphs and some other info. The max PI/C1 error rate should not exceed 280 (and it's recommended that it's under 100 for XGD3 burns) and the max PO/C2 error rate should not exceed 4. If you get the occasional spike that goes up higher than these maximums, you should be OK, but if the graph lines are consistently above these recommended levels then your burn is poor and it may make your 360's drive work harder to read the disc, it may cause disc read errors, a failed game install, or the game may freeze up or crash. This may also lead to your 360 failing certain challenges as the game will not mimic a proper pressed original disc. Using the recommended settings in step 6 and Verbatim media, all my burns have PI/C1 max of less than 50 and PO/C2 max of less than 4, which is an excellent result. • About us Se7enSins caters to all types of gamers across the globe, aiming to provide access to the latest news, releases, mods and a great deal more. With a diverse range of content and a welcoming, amicable and tight-knit community, Se7enSins is a forum open to anyone and everyone.

35492352 ( 0.0%) @0.8x, remaining 45:39 RBU 89.7% UBU 7.1% The burn should take around approximately 40 minutes at 2.4x write speed, depending on the size of the iso. Burning.000 Files To burn a.000 image you must first patch it with a Java application called imagebpatch.jar. You can get it. You will need to have java installed to use this. Pacman -S jre Logout and login again (or source /etc/profile) in order to update your $PATH.

Requirements to burn XGD2: 1.DVD+R dual layer disc (8.5gb) 2.ANY burner that supports dual layer 3.Game iso file (XGD2 are 7.30gb) 4.Flashed Xbox 360 Requirements to burn XGD3: 1.DVD+R dual layer disc (8.5gb) ***VERBATIMS RECOMMENDED*** any cheap media could easily get you banned from xbox live. If you don't care about getting banned from xbox live then you can just burn it on any discs/media 2.A Dual layer burner that supports Maxburner firmware.

As only around 97% of an XGD3 ISO will fit on the disc if you're not using a Burner Max burner, this is not the optimal method for burning XGD3 games. Certain games (Forza 4, for example) feature new checks that will fail if you burn the game using this method, so it's recommended to get a Burner Max-compatible drive and burn using the instructions in steps 5 and 6. Burning XGD2 and XGD3 games WITH Burner Max. XGD2 - Use the same procedure as mentioned for XGD2 games in step 4. XGD3 - You can burn the games as you would burn XGD2 games, although pay attention to the recommended media and burn settings in step 6 of this guide. There is no longer any need to truncate the ISO as 100% of it will fit on the disc and ImgBurn will no longer give you this option at the start of the burn once your burner is flashed with Burner Max. Recommended media and burn settings for Burner Max burns.

• Burning Xbox 360 XGD3 ISO games is easy, once you know how. A lot of people seem to have problems with the newer XGD3 game discs which have been used since late 2011.

A question I get a lot about Xbox 360 flashes is 'How do I burn games'? Well, in this guide I will be showing you all the materials required and steps needed in order to properly burn a Xbox 360 for use with a flashed console. Requirements: Dual-layer DVD burner RAR extracting software (,, etc.) Flashed Xbox 360 console (Preferably with latest hacked DVD firmware, LT+ 1.1) A blank DVD+R DL Backup or downloaded game OK, first make sure you have a game downloaded or backed up. If you download a game, it will most likely be in split RAR files, like this: Now, open the first part (.rar or.r00) and extract the game to your folder of choice. After it finishes extracting, you want to patch it with abgx360. Open abgx, and select your ISO.

Burning Xbox 360 Games Without Modding

If.dvd files are associated with ImgBurn then when you double-click one, ImgBurn will automatically open. If they're not associated with ImgBurn, you can associate them like this: - 1. Right-click a.dvd file and choose 'Open with' then choose 'Choose default program'. Select ImgBurn as the default program. Setting hotspot mikrotik. Tick the box next to 'Always use the selected program to open this kind of file'.

Want free Xbox 360 games? Well, join the club. But you can actually do something about it and download and burn Xbox 360 games with a few programs and a little knowhow.

Browse for your game and choose the.dvd file, not the.iso. The game will not burn properly if you burn the.iso. Now click the picture of the file to disc. Your game is burning! Wait until it finishes, and if you did everything right, you should have a working 360 backup!

Since May 2011, the /dev/dvd symlink has been removed in udev. See for more details.

I'd recommend just having the guide to say always set autofix to level 3 for abgx360 even if no errors show up in level 2 it's best to always run it at level 3 so you don't have to run abgx360 twice, it's just more efficient that way. And just to be extra safe you should also say to check the tab for checking for anydvd style game data corruption, in my personal experience some older 360 games i have download have been plagued with this. Also in ImgBurn you should recommend burning using only games with a.dvd file for 360 games, and i understand somewhat setting speed to 2.4x and 4.0x but leaving AWS(automatic write speed) set in IMGBurn has never given me a bad burn and that's even on 8x rated Memorex DVD+R DL.

After you've installed Java and downloaded the application, just run it in the console: java -jar imgbpatch.jar /path/to/image.000 Now it can be burned like an iso, using the following. XGD1/XGD2: growisofs -use-the-force-luke=dao -use-the-force-luke=break:1913760 -dvd-compat -speed=2 -Z /dev/sr0=/path/to/game.000 XGD3(iXtreme Burner Max Firmware): growisofs -use-the-force-luke=dao -use-the-force-luke=break:2133520 -dvd-compat -speed=2 -Z /dev/sr0=/path/to/game.000 Replace /dev/sr0 with the path to your dual layer drive. For most systems it will be /dev/sr0.

Stealth Patching Stealth patching patches a game image to make it ignore the security check done by the Xbox 360 console upon boot. If you use a stealth firmware, you will need to patch your backup. You can do this with a tool called AUR, which can be found in the. Abgx360 works on.iso and.000 images.

I will definitely update this topic, if/when I'll get my new drive and retry burning, in case someone else might be having the same problem. Update, I was able to get a first successful (xgd3!) burn with 100% verification in both ImgBurn and abgx360 verify tools without any errors by enabling the OPC setting. The kprobe results seem very much the same as the previous failburns: PI max 18, avg 1.44 PIF max 3, avg 0.10 (the latter seems a bit high to me but has been like that with all burns) That opc setting had somehow slipped untouched when fiddling with different settings combinations before (to be honest, I didn't make that much burns, about five failed attempts with slightly different settings and images) after stopping wasting the discs since they all came out straight coasters.) Is this normal behaviour, to have such a drastic difference just with flipping opc on/off? From what I have read, everyone just seems to mention it as a potential cause of deviation in kprobe quality and that's all but to me it did this kinda thing, without changing the kprobe quality at all. Edited May 26, 2014 by Myski.